real.exe stops after 380 time step

Any issues with the actual running of the WRF.

real.exe stops after 380 time step

Postby k.oguz50 » Thu Aug 16, 2018 10:14 am

Dear wrf users,

I try long term run with WRF. Every steps are OK until real.exe. However, real.exe gives error after 380 time step. I tried to run before and after 2017-12-04 for 30 days. There is no problem at the metgrids.

Error and my namelist are below. Any help would be appreciated.

Thanks.

ERROR:

Domain 1: Current date being processed: 2017-12-04_18:00:00.0000, which is loop # 380 out of 489
configflags%julyr, %julday, %gmt: 2017 338 18.00000
metgrid input_wrf.F first_date_input = 2017-12-04_18:00:00
metgrid input_wrf.F first_date_nml = 2017-09-01_00:00:00
d01 2017-12-04_18:00:00 Timing for input 0 s.
d01 2017-12-04_18:00:00 flag_soil_layers read from met_em file is 1
Using sfcprs3 to compute psfc
d01 2017-12-04_18:00:00 flag value of flag_qnwfa is 0
all_dim = 2
order = 2
i,j = 68 55
p array = NaN 4.605170
f array = 0.9261316 -8.182937
p target= 11.51549 11.50735 11.49623 11.48204
11.46413 11.44129 11.41317 11.37152 11.31693
11.25919 11.19790 11.10770 10.98663 10.86270
10.73570 10.60539 10.47149 10.33370 10.19164
10.04489 9.892964 9.735258 9.573883 9.412059
9.250169 9.088200 8.926138 8.763968 8.601671
forrtl: severe (174): SIGSEGV, segmentation fault occurred
Image PC Routine Line Source
real.exe 00000000027639AC Unknown Unknown Unknown
real.exe 0000000002753CE6 Unknown Unknown Unknown
real.exe 00000000026F4CEA Unknown Unknown Unknown
real.exe 00000000007A89CB Unknown Unknown Unknown
real.exe 0000000000469A45 Unknown Unknown Unknown
real.exe 000000000047000E Unknown Unknown Unknown
real.exe 00000000004AA7E6 Unknown Unknown Unknown
real.exe 00000000004BEDE5 Unknown Unknown Unknown
real.exe 000000000040E235 Unknown Unknown Unknown
real.exe 000000000040C7AC Unknown Unknown Unknown
libc.so.6 00002AE1B39E0BC6 Unknown Unknown Unknown
real.exe 000000000040C6A9 Unknown Unknown Unknown



NAMELIST.INPUT

&time_control
run_days = 122,
run_hours = 0,
run_minutes = 0,
run_seconds = 0,
start_year = 2017, 2000, 2000,
start_month = 09, 01, 01,
start_day = 01, 24, 24,
start_hour = 00, 12, 12,
start_minute = 00, 00, 00,
start_second = 00, 00, 00,
end_year = 2018, 2000, 2000,
end_month = 01, 01, 01,
end_day = 01, 25, 25,
end_hour = 00, 12, 12,
end_minute = 00, 00, 00,
end_second = 00, 00, 00,
interval_seconds = 21600
input_from_file = .true.,.true.,.true.,
history_interval = 360, 60, 60,
history_outname = "/iklim1/atm02/output/wrfout_201711.nc",
frames_per_outfile = 1000, 1000, 1000,
restart = .false.,
restart_interval = 302400,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
/

&domains
time_step = 120,
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 1,
e_we = 100, 112, 94,
e_sn = 60, 97, 91,
e_vert = 30, 30, 30,
p_top_requested = 5000,
num_metgrid_levels = 38,
num_metgrid_soil_levels = 4,
dx = 20000, 10000, 3333.33,
dy = 20000, 10000, 3333.33,
grid_id = 1, 2, 3,
parent_id = 1, 1, 2,
i_parent_start = 1, 31, 30,
j_parent_start = 1, 17, 30,
parent_grid_ratio = 1, 3, 3,
parent_time_step_ratio = 1, 3, 3,
feedback = 1,
smooth_option = 0
/

&physics
physics_suite = 'CONUS'
radt = 30, 30, 30,
bldt = 0, 0, 0,
cudt = 5, 5, 5,
icloud = 1,
num_soil_layers = 4,
num_land_cat = 21,
sf_urban_physics = 0, 0, 0,
/

&fdda
/

&dynamics
w_damping = 0,
diff_opt = 1, 1, 1,
km_opt = 4, 4, 4,
diff_6th_opt = 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2
khdif = 0, 0, 0,
kvdif = 0, 0, 0,
non_hydrostatic = .false., .true., .true.,
moist_adv_opt = 1, 1, 1,
scalar_adv_opt = 1, 1, 1,
gwd_opt = 1,
/

&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false.,.false.,
nested = .false., .true., .true.,
/

&grib2
/

&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/

&dfi_control
dfi_opt = 0
dfi_nfilter = 7
dfi_write_filtered_input = .false.
dfi_write_dfi_history = .false.
dfi_cutoff_seconds = 3600
dfi_time_dim = 1000
dfi_bckstop_year = 2016
dfi_bckstop_month = 02
dfi_bckstop_day = 07
dfi_bckstop_hour = 00
dfi_bckstop_minute = 00
dfi_bckstop_second = 00
dfi_fwdstop_year = 2016
dfi_fwdstop_month = 02
dfi_fwdstop_day = 08
dfi_fwdstop_hour = 00
dfi_fwdstop_minute = 00
dfi_fwdstop_second = 00
/
k.oguz50
 
Posts: 2
Joined: Tue Mar 15, 2016 7:29 am

Return to Runtime Problems

Who is online

Users browsing this forum: No registered users and 8 guests