Installation

All things involving the setup (compiling, NetCDF, etc.) of the WRF Model itself.

Installation

Postby elham » Mon Jan 11, 2016 9:58 am

Hi, everyone
I want to install cwrf. For this I compile gfortran with gcc(serial).
During compilation i have following errors in compile.log:
1
Error: Syntax error in argument list at (1)
module_wrf_error.f90:58.26:

None of WRF_EM_CORE, WRF_NMM_CORE,
specified in shell environment....



**** Compiling: WRF_EM_CORE .


1
Error: Syntax error in argument list at (1)
module_wrf_error.f90:58.26:

str_with_rc = TRIM(str
1
Error: Syntax error in argument list at (1)
make[2]: [module_wrf_error.o] Error 1 (ignored)
rm -f module_driver_constants.o
/usr/bin/cpp -P -I/home/elham/CWRF/CWRFV3.1.1/inc -DEM_CORE=1 -DNMM_CORE=0 - "
1
Error: Syntax error in argument list at (1)
module_configure.f90:5576.23:

" Using registry defaults for variables in "
1
Error: Invalid character in name at (1)
module_configure.f90:11177.89:

L wrf_debug(0, "Are pd_moist, pd_chem, pd_tke, or pd_scalar still in your "
1
Error: Syntax error in argument list at (1)
module_configure.f90:11178.37:

TRIM(nml_name)
1
Error: 'trim' at (1) is not a variable
module_configure.f90:11180.60:

"Replace them with moist_adv_opt, chem_adv_opt, tke_adv_opt"
1
Error: Syntax error in argument list at (1)
module_configure.f90:11181.33:

" and scalar_adv_opt, respectively.")
1
Error: Invalid character in name at (1)
module_configure.f90:11186.55:

CALL wrf_debug(0,"Is ucmcall still in your "
1
Error: Syntax error in argument list at (1)
module_configure.f90:11193.60:

CALL wrf_debug(0,"Is obs_nobs_prt still in your "
1
Error: Syntax error in argument list at (1)
module_configure.f90:11200.96:

ebug(0,"Are global, print_detail_airep, print_detail_timing still in your "
1
Error: Syntax error in argument list at (1)
module_configure.f90:11201.32:

TRIM(nml_name)
1
Error: 'trim' at (1) is not a variable
module_configure.f90:11203.57:

"Remove global, print_detail_airep, print_detail_timing "
1
Error: Syntax error in argument list at (1)
module_configure.f90:11204.33:

"from wrfvar1 namelist as they are obsolete.")
1
Error: Invalid character in name at (1)
module_configure.f90:11209.89:

L wrf_debug(0,"Are write_qcw, write_qrn, write_qci, write_qsn, write_qgr, "
1
Error: Syntax error in argument list at (1)
module_configure.f90:11210.29:

"write_filtered_obs still in your "
1
Error: Invalid character in name at (1)
module_configure.f90:11211.32:

TRIM(nml_name)
1
Error: 'trim' at (1) is not a variable
module_configure.f90:11213.64:

"Remove write_qcw, write_qrn, write_qci, write_qsn, write_qgr, "
1
Error: Syntax error in argument list at (1)
module_configure.f90:11214.33:

"write_filtered_obs as they are obsolete.")
1
Error: Invalid character in name at (1)
module_configure.f90:11219.59:

CALL wrf_debug(0,"Is use_eos_radobs still in your "
1
Error: Syntax error in argument list at (1)
module_configure.f90:11220.29:

TRIM(nml_name)
1
Error: 'trim' at (1) is not a variable
module_configure.f90:11227.87:

ALL wrf_debug(0,"Are use_crtm_kmatrix_fast, spccoeff_file, taucoeff_file, "
1
Error: Syntax error in argument list at (1)
module_configure.f90:11228.29:

"aerosolcoeff_file, cloudcoeff_file, emiscoeff_file
1
Error: Invalid character in name at (1)
module_configure.f90:11229.32:

TRIM(nml_name)
1
Error: 'trim' at (1) is not a variable
module_configure.f90:11235.14:

TRIM(nml_name)
1
Error: Syntax error in argument list at (1)
module_configure.f90:5517.69:

READ ( UNIT = nml_read_unit , NML = time_control , ERR=9201, END=9202
1
Error: ERR tag label 9201 at (1) not defined
Fatal Error: Error count reached limit of 25.
make[2]: [module_configure.o] Error 1 (ignored)
rm -f module_alloc_space.o

1
Fatal Error: Can't open module file 'module_configure.mod' for reading at (1): No such file or directory
make[2]: [module_domain.o] Error 1 (ignored)
rm -f module_timing.o
/usr/bin/cpp -P -I/home/elham/CWRF/CWRFV3.1.1/inc -DEM_CORE=1 -DNMM_CORE=0 -/CWRF/CWRFV3.1.1/inc module_nesting.f90 ; \
fi
module_nesting.f90:4.7:

USE module_domain
1
Fatal Error: Can't open module file 'module_domain.mod' for reading at (1): No such file or directory
make[2]: [module_nesting.o] Error 1 (ignored)
rm -f module_integrate.o
/home/elham/CWRF/CWRFV3.1.1/tools/standard.exe module_integrate.F > module_integrate.b
/usr/bin/cpp -P -I/home/elham/CWRF/CWRFV3.1.1/inc -DEM_CORE=1 -DNMM_CORE=0 -
9201 CALL wrf_message("Error while reading namelist "
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:5575.33:

9202 CALL wrf_message("Namelist "
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:5576.23:

" Using registry defaults for variables in "
1
Error: Invalid character in name at (1)
../frame/module_configure.f90:11177.89:

L wrf_debug(0, "Are pd_moist, pd_chem, pd_tke, or pd_scalar still in your "
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:11178.37:

TRIM(nml_name)
1
Error: 'trim' at (1) is not a variable
../frame/module_configure.f90:11180.60:

"Replace them with moist_adv_opt, chem_adv_opt, tke_adv_opt"
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:11181.33:

" and scalar_adv_opt, respectively.")
1
Error: Invalid character in name at (1)
../frame/module_configure.f90:11186.55:

CALL wrf_debug(0,"Is ucmcall still in your "
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:11193.60:

CALL wrf_debug(0,"Is obs_nobs_prt still in your "
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:11200.96:

ebug(0,"Are global, print_detail_airep, print_detail_timing still in your "
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:11201.32:

TRIM(nml_name)
1
Error: 'trim' at (1) is not a variable
../frame/module_configure.f90:11203.57:

"Remove global, print_detail_airep, print_detail_timing "
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:11204.33:

"from wrfvar1 namelist as they are obsolete.")
1
Error: Invalid character in name at (1)
../frame/module_configure.f90:11209.89:

L wrf_debug(0,"Are write_qcw, write_qrn, write_qci, write_qsn, write_qgr, "
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:11210.29:

"write_filtered_obs still in your "
1
Error: Invalid character in name at (1)
../frame/module_configure.f90:11211.32:

TRIM(nml_name)
1
Error: 'trim' at (1) is not a variable
../frame/module_configure.f90:11213.64:

"Remove write_qcw, write_qrn, write_qci, write_qsn, write_qgr, "
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:11214.33:

"write_filtered_obs as they are obsolete.")
1
Error: Invalid character in name at (1)
../frame/module_configure.f90:11219.59:

CALL wrf_debug(0,"Is use_eos_radobs still in your "
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:11220.29:

TRIM(nml_name)
1
Error: 'trim' at (1) is not a variable
../frame/module_configure.f90:11227.87:

ALL wrf_debug(0,"Are use_crtm_kmatrix_fast, spccoeff_file, taucoeff_file, "
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:11228.29:

"aerosolcoeff_file, cloudcoeff_file, emiscoeff_file
1
Error: Invalid character in name at (1)
../frame/module_configure.f90:11229.32:

TRIM(nml_name)
1
Error: 'trim' at (1) is not a variable
../frame/module_configure.f90:11235.14:

TRIM(nml_name)
1
Error: Syntax error in argument list at (1)
../frame/module_configure.f90:5517.69:

READ ( UNIT = nml_read_unit , NML = time_control , ERR=9201, END=9202
1
Error: ERR tag label 9201 at (1) not defined
Fatal Error: Error count reached limit of 25.
make[1]: [../frame/module_configure.o] Error 1 (ignored)
rm -f ../frame/module_dm.o

Any kind of suggestions or hints are appreciated.
Thank you so much in advance
Elham
elham
 
Posts: 1
Joined: Mon Dec 15, 2014 1:54 am

Re: Installation

Postby bijayguha » Fri May 10, 2019 8:31 am

Did you get the solution?? @ elham

I am having the same issue. Actually I need this old version (WRF 3.3.1) to compile for some own purpose. But have the same issues repeatedly that you posted..

use wrf_data
1
Fatal Error: Can't open module file 'wrf_data.mod' for reading at (1): No such file or directory




then continue with module related error






1
Error: Syntax error in argument list at (1)
module_configure.f90:8974.33:

9202 CALL wrf_message("Namelist "
1
Error: Syntax error in argument list at (1)
module_configure.f90:8975.23:

" Using registry defaults for variables in "
1
Error: Invalid character in name at (1)
module_configure.f90:22285.92:

CALL wrf_debug(0, "-- Are pd_moist, pd_chem, pd_tke, or pd_scalar still in your "
1
Error: Syntax error in argument list at (1)
module_configure.f90:22286.35:

TRIM(nml_name)
1
Error: 'trim' at (1) is not a variable
module_configure.f90:22287.93:

CALL wrf_debug(0, "-- Replace them with moist_adv_opt, chem_adv_opt, tke_adv_opt "
1
Error: Syntax error in argument list at (1)
module_configure.f90:22288.30:

" and scalar_adv_opt, respectively.")

......etc
bijayguha
 
Posts: 8
Joined: Wed Jul 25, 2018 8:18 am


Return to Installation

Who is online

Users browsing this forum: No registered users and 5 guests