WRFPLUS 3.7.1 compilation error.

Setting up the 3DVAR package within WRF.

WRFPLUS 3.7.1 compilation error.

Postby sayok88 » Thu Oct 15, 2015 10:48 am

I am trying to compile WRFDA for 4DVAR in an AIX 5.3 system with xlf version 12.1, but the compilation is failing because its showing some files are missing such as module_state_description.F,etc.

Please Help!!!

Configuration
Code: Select all
checking for perl5... no
checking for perl... found /usr/bin/perl (perl)
Will use NETCDF in dir: /xxxxx/xxxxx/HWRF_lib
PHDF5 not set in environment. Will configure WRF for use without.
Will use 'timex' to report timing information


If you REALLY want Grib2 output from WRF, modify the arch/Config_new.pl script.
Right now you are not getting the Jasper lib, from the environment, compiled into WRF.

------------------------------------------------------------------------
Please select from among the following AIX ARCH options:

  1. (serial)   2. (dmpar)   IBM (xlf90_r/cc_r)

Enter selection [1-2] : 2
------------------------------------------------------------------------

Configuration successful!
------------------------------------------------------------------------
testing for MPI_Comm_f2c and MPI_Comm_c2f
   MPI_Comm_f2c and MPI_Comm_c2f are supported
testing for fseeko and fseeko64
fseeko64 is supported
------------------------------------------------------------------------

# Settings for    AIX xlf compiler with xlc  (dmpar)
#
DESCRIPTION     =       IBM ($SFC/$SCC)
DMPARALLEL      =        1
OMPCPP          =       # -D_OPENMP
OMP             =       # -qsmp=noauto
OMPCC           =       # -qsmp=noauto
SFC             =       xlf90_r
SCC             =       cc_r
SC99            =       c99_r
CCOMP           =       cc_r
DM_FC           =       mpxlf90_r
DM_CC           =       mpcc_r -DMPI2_SUPPORT -DMPI2_SUPPORT
FC              =       timex $(DM_FC)
CC              =       $(DM_CC) -DFSEEKO64_OK
LD              =       $(FC)
RWORDSIZE       =       8
PROMOTION       =        -qrealsize=$(RWORDSIZE) -qintsize=4
ARCH_LOCAL      =       -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM
CFLAGS_LOCAL    =       -DNOUNDERSCORE
LDFLAGS_LOCAL   =       -lmass -lmassv -bnoquiet # print diagnostic messages
CPLUSPLUSLIB    =       -lC
ESMF_LDFLAG     =       $(CPLUSPLUSLIB)
# -qhot commented out in 3.0.1.1 release because of reported problems with
# model results under certain configurations. Use at your own risk.
# -qstrict added in 3.6.1 release because of reported problems with
# model stability under certain configurations. Use at your own risk.
FCOPTIM         =       -O3 -qalias_size=209715200 -qstrict # -qhot
FCREDUCEDOPT    =       -O2 # implies -qstrict
FCNOOPT         =       -qnoopt
FCDEBUG         =       # -g $(FCNOOPT) -qfullpath
FORMAT_FIXED    =       -qfixed
FORMAT_FREE     =       -qfree=f90
FCSUFFIX        =       -qsuffix=f=f90
BYTESWAPIO      =
FCBASEOPTS_NO_G =       -w -qspill=81920 -qmaxmem=-1 $(FORMAT_FREE) $(BYTESWAPIO)  #-qflttrap=zerodivide:invalid:enable -qsigtrap -C # -qinitauto=7FF7FFFF
FCBASEOPTS      =       $(FCBASEOPTS_NO_G) $(FCDEBUG)
MODULE_SRCH_FLAG =
TRADFLAG        =       #-traditional  # causing troubles with xl cpp on AIX, -traditional removed fom default settings
CPP             =       /lib/cpp -P
AR              =       ar
ARFLAGS         =       ru
M4              =       m4 -B 20000
RANLIB          =       ranlib
CC_TOOLS        =       cc

###########################################################
######################
# POSTAMBLE

FGREP = fgrep -iq

ARCHFLAGS       =    $(COREDEFS) -DIWORDSIZE=$(IWORDSIZE) -DDWORDSIZE=$(DWORDSIZE) -DRWORDSIZE=$(RWORDSIZE) -DLWORDSIZE=$(LWORDSIZE) \
                     $(ARCH_LOCAL) \
                     $(DA_ARCHFLAGS) \
                      -DDM_PARALLEL \
                       \
                      -DNETCDF \
                       \
                       \
                       \
                       \
                       \
                       \
                       \
                       \
                       \
                      -DUSE_ALLOCATABLES \
                      -DGRIB1 \
                      -DINTIO \
                      -DLIMIT_ARGS \
                      -DCONFIG_BUF_LEN=$(CONFIG_BUF_LEN) \
                      -DMAX_DOMAINS_F=$(MAX_DOMAINS) \
                      -DMAX_HISTORY=$(MAX_HISTORY) \
                      -DNMM_NEST=$(WRF_NMM_NEST)
CFLAGS          =    $(CFLAGS_LOCAL) -DDM_PARALLEL  \
                      -DMAX_HISTORY=$(MAX_HISTORY) -DNMM_CORE=0
FCFLAGS         =    $(FCOPTIM) $(FCBASEOPTS)
ESMF_LIB_FLAGS  =
# ESMF 5 -- these are defined in esmf.mk, included above
 ESMF_IO_LIB     =    -L$(WRF_SRC_ROOT_DIR)/external/esmf_time_f90 -lesmf_time
ESMF_IO_LIB_EXT =    -L$(WRF_SRC_ROOT_DIR)/external/esmf_time_f90 -lesmf_time
INCLUDE_MODULES =    $(MODULE_SRCH_FLAG) \
                     $(ESMF_MOD_INC) $(ESMF_LIB_FLAGS) \
                      -I$(WRF_SRC_ROOT_DIR)/main \
                      -I$(WRF_SRC_ROOT_DIR)/external/io_netcdf \
                      -I$(WRF_SRC_ROOT_DIR)/external/io_int \
                      -I$(WRF_SRC_ROOT_DIR)/frame \
                      -I$(WRF_SRC_ROOT_DIR)/share \
                      -I$(WRF_SRC_ROOT_DIR)/phys \
                      -I$(WRF_SRC_ROOT_DIR)/chem -I$(WRF_SRC_ROOT_DIR)/inc \
                      -I$(NETCDFPATH)/include \

REGISTRY        =    Registry
CC_TOOLS_CFLAGS = -DNMM_CORE=0

 LIB_BUNDLED     = \
                      $(WRF_SRC_ROOT_DIR)/external/fftpack/fftpack5/libfftpack.a \
                      $(WRF_SRC_ROOT_DIR)/external/io_grib1/libio_grib1.a \
                      $(WRF_SRC_ROOT_DIR)/external/io_grib_share/libio_grib_share.a \
                      $(WRF_SRC_ROOT_DIR)/external/io_int/libwrfio_int.a \
                      $(ESMF_IO_LIB) \
                      $(WRF_SRC_ROOT_DIR)/external/RSL_LITE/librsl_lite.a \
                      $(WRF_SRC_ROOT_DIR)/frame/module_internal_header_util.o \
                      $(WRF_SRC_ROOT_DIR)/frame/pack_utils.o

 LIB_EXTERNAL    = \
                      -L$(WRF_SRC_ROOT_DIR)/external/io_netcdf -lwrfio_nf -L/gpfs1/umohanty/HWRF_lib/lib  -lnetcdf

LIB             =    $(LIB_BUNDLED) $(LIB_EXTERNAL) $(LIB_LOCAL) $(LIB_WRF_HYDRO)
LDFLAGS         =    $(OMP) $(FCFLAGS) $(LDFLAGS_LOCAL) -bmaxstack:256000000 -bmaxdata:2048000000
ENVCOMPDEFS     =
WRF_CHEM        =       0
CPPFLAGS        =    $(ARCHFLAGS) $(ENVCOMPDEFS) -I$(LIBINCLUDE) $(TRADFLAG)
NETCDFPATH      =    /gpfs1/umohanty/HWRF_lib
PNETCDFPATH     =

bundled:  io_only
external: io_only $(WRF_SRC_ROOT_DIR)/external/RSL_LITE/librsl_lite.a gen_comms_rsllite module_dm_rsllite $(ESMF_TARGET)
io_only:  esmf_time wrfio_nf   \
          wrf_ioapi_includes wrfio_grib_share wrfio_grib1 wrfio_int fftpack


######################
------------------------------------------------------------------------
Settings listed above are written to configure.wrf.
If you wish to change settings, please edit that file.
If you wish to change the default options, edit the file:
     arch/configure_new.defaults


Compile out

Code: Select all
copying Registry/Registry.EM to Registry/Registry
 
==============================================================================================
 
V3.7.1   
 
Compiling: WRF_EM_CORE 
WRFIO_NCD_LARGE_FILE_SUPPORT=1
WRFIO_NCD_LARGE_FILE=1
 
AIX f2n2login2 3 5 00CEB8834C00
 
Not sure how to figure out the version of this compiler: xlf90_r
 
==============================================================================================
 
not setting parallel make
 
==============================================================================================
 
The following indicate the compilers selected to build the WRF system
 
Serial Fortran compiler (mostly for tool generation):
which SFC
/usr/bin/xlf90_r
 
Serial C compiler (mostly for tool generation):
which SCC
/usr/vac/bin/cc_r
 
Fortran compiler for the model source code:
which FC
/usr/bin/mpxlf90_r
Will use 'timex' to report timing information
 
C compiler for the model source code:
which CC
/usr/bin/mpcc_r
 
==============================================================================================
 
   make -i -r MODULE_DIRS="-I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include  " ext
--------------------------------------
   ( cd frame ; make -i -r externals )
   ( cd /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90 ;  make  FC="xlf90_r -qrealsize=8 -qintsize=4  -w -qspill=81920 -qmaxmem=-1 -qfree=f90    " RANLIB="ranlib"  CPP="/lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -I. -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0 " AR="ar" ARFLAGS="ru" )
   /bin/rm -f ESMF_Base.o
   sed -e "/\!.*'/s/'//g" ESMF_Base.F90 > ESMF_Base.b
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -I. -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I. ESMF_Base.b > ESMF_Base.f
   /bin/rm -f ESMF_Base.b
   xlf90_r -qrealsize=8 -qintsize=4  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -o ESMF_Base.o -c ESMF_Base.f
** esmf_basemod   === End of Compilation 1 ===
1501-510  Compilation successful for file ESMF_Base.f.
   /bin/rm -f ESMF_BaseTime.o
   sed -e "/\!.*'/s/'//g" ESMF_BaseTime.F90 > ESMF_BaseTime.b
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -I. -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I. ESMF_BaseTime.b > ESMF_BaseTime.f
   /bin/rm -f ESMF_BaseTime.b
   xlf90_r -qrealsize=8 -qintsize=4  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -o ESMF_BaseTime.o -c ESMF_BaseTime.f
** esmf_basetimemod   === End of Compilation 1 ===
1501-510  Compilation successful for file ESMF_BaseTime.f.
   /bin/rm -f ESMF_Calendar.o
   sed -e "/\!.*'/s/'//g" ESMF_Calendar.F90 > ESMF_Calendar.b
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -I. -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I. ESMF_Calendar.b > ESMF_Calendar.f
   /bin/rm -f ESMF_Calendar.b
   xlf90_r -qrealsize=8 -qintsize=4  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -o ESMF_Calendar.o -c ESMF_Calendar.f
** esmf_calendarmod   === End of Compilation 1 ===
1501-510  Compilation successful for file ESMF_Calendar.f.
   /bin/rm -f ESMF_Fraction.o
   sed -e "/\!.*'/s/'//g" ESMF_Fraction.F90 > ESMF_Fraction.b
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -I. -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I. ESMF_Fraction.b > ESMF_Fraction.f
   /bin/rm -f ESMF_Fraction.b
   xlf90_r -qrealsize=8 -qintsize=4  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -o ESMF_Fraction.o -c ESMF_Fraction.f
** esmf_fractionmod   === End of Compilation 1 ===
1501-510  Compilation successful for file ESMF_Fraction.f.
   /bin/rm -f ESMF_TimeInterval.o
   sed -e "/\!.*'/s/'//g" ESMF_TimeInterval.F90 > ESMF_TimeInterval.b
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -I. -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I. ESMF_TimeInterval.b > ESMF_TimeInterval.f
   /bin/rm -f ESMF_TimeInterval.b
   xlf90_r -qrealsize=8 -qintsize=4  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -o ESMF_TimeInterval.o -c ESMF_TimeInterval.f
** esmf_timeintervalmod   === End of Compilation 1 ===
1501-510  Compilation successful for file ESMF_TimeInterval.f.
   /bin/rm -f ESMF_Stubs.o
   sed -e "/\!.*'/s/'//g" ESMF_Stubs.F90 > ESMF_Stubs.b
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -I. -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I. ESMF_Stubs.b > ESMF_Stubs.f
   /bin/rm -f ESMF_Stubs.b
   xlf90_r -qrealsize=8 -qintsize=4  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -o ESMF_Stubs.o -c ESMF_Stubs.f
** esmf_stubs   === End of Compilation 1 ===
1501-510  Compilation successful for file ESMF_Stubs.f.
   /bin/rm -f ESMF_Time.o
   sed -e "/\!.*'/s/'//g" ESMF_Time.F90 > ESMF_Time.b
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -I. -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I. ESMF_Time.b > ESMF_Time.f
   /bin/rm -f ESMF_Time.b
   xlf90_r -qrealsize=8 -qintsize=4  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -o ESMF_Time.o -c ESMF_Time.f
** esmf_timemod   === End of Compilation 1 ===
1501-510  Compilation successful for file ESMF_Time.f.
   /bin/rm -f ESMF_Alarm.o
   sed -e "/\!.*'/s/'//g" ESMF_Alarm.F90 > ESMF_Alarm.b
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -I. -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I. ESMF_Alarm.b > ESMF_Alarm.f
   /bin/rm -f ESMF_Alarm.b
   xlf90_r -qrealsize=8 -qintsize=4  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -o ESMF_Alarm.o -c ESMF_Alarm.f
** esmf_alarmmod   === End of Compilation 1 ===
1501-510  Compilation successful for file ESMF_Alarm.f.
   /bin/rm -f ESMF_Clock.o
   sed -e "/\!.*'/s/'//g" ESMF_Clock.F90 > ESMF_Clock.b
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -I. -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I. ESMF_Clock.b > ESMF_Clock.f
   /bin/rm -f ESMF_Clock.b
   xlf90_r -qrealsize=8 -qintsize=4  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -o ESMF_Clock.o -c ESMF_Clock.f
** esmf_clockmod   === End of Compilation 1 ===
1501-510  Compilation successful for file ESMF_Clock.f.
   /bin/rm -f Meat.o
   sed -e "/\!.*'/s/'//g" Meat.F90 > Meat.b
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -I. -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I. Meat.b > Meat.f
   /bin/rm -f Meat.b
   xlf90_r -qrealsize=8 -qintsize=4  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -o Meat.o -c Meat.f
** normalize_basetime   === End of Compilation 1 ===
** normalize_time   === End of Compilation 2 ===

.
.
...
--------------------------------------
   ( cd frame ; make -i -r  framework;  cd ../external/io_netcdf ;  make -i -r NETCDFPATH="/xxxxx/xxxxx/HWRF_lib" FC="timex mpxlf90_r -w -qspill=81920 -qmaxmem=-1 -qfree=f90    " RANLIB="ranlib"  CPP="/lib/cpp -P" LDFLAGS=" -O3 -qalias_size=209715200 -qstrict  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -lmass -lmassv -bnoquiet  -bmaxstack:256000000 -bmaxdata:2048000000" TRADFLAG="" ESMF_IO_LIB_EXT="-L/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90 -lesmf_time"  LIB_LOCAL=""  ESMF_MOD_DEPENDENCE="/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90/module_utility.o" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf;  cd ../io_netcdf ;  make -i -r NETCDFPATH="/xxxxx/xxxxx/HWRF_lib" FC="xlf90_r -w -qspill=81920 -qmaxmem=-1 -qfree=f90    " RANLIB="ranlib"  CPP="/lib/cpp -P" LDFLAGS=" -O3 -qalias_size=209715200 -qstrict  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -lmass -lmassv -bnoquiet  -bmaxstack:256000000 -bmaxdata:2048000000" TRADFLAG="" ESMF_IO_LIB_EXT="-L/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90 -lesmf_time"  LIB_LOCAL=""  ESMF_MOD_DEPENDENCE="/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90/module_utility.o" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR";  cd ../io_pio ;  echo SKIPPING PIO BUILD make -i -r NETCDFPATH="" FC="xlf90_r -w -qspill=81920 -qmaxmem=-1 -qfree=f90    " RANLIB="ranlib"  CPP="/lib/cpp -P" LDFLAGS=" -O3 -qalias_size=209715200 -qstrict  -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -lmass -lmassv -bnoquiet  -bmaxstack:256000000 -bmaxdata:2048000000" TRADFLAG="" ESMF_IO_LIB_EXT="-L/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90 -lesmf_time"  LIB_LOCAL=""  ESMF_MOD_DEPENDENCE="/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90/module_utility.o" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR";  cd ../io_int ;  make -i -r SFC="xlf90_r -w -qspill=81920 -qmaxmem=-1 -qfree=f90    " FC="xlf90_r -w -qspill=81920 -qmaxmem=-1 -qfree=f90    " RANLIB="ranlib" CPP="/lib/cpp -P -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM" DM_FC="mpxlf90_r -w -qspill=81920 -qmaxmem=-1 -qfree=f90    " TRADFLAG="" ESMF_IO_LIB_EXT="-L/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90 -lesmf_time"  ESMF_MOD_DEPENDENCE="/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90/module_utility.o" AR="INTERNAL_BUILD_ERROR_SHOULD_NOT_NEED_AR" diffwrf ;  cd ../../frame )
   ( cd .. ; tools/registry -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -DNEW_BDYS Registry/Registry ) ;
opening Registry/registry.dimspec
including Registry/registry.dimspec
opening Registry/Registry.EM_COMMON
including Registry/Registry.EM_COMMON
Registry error: unbalanced quotes in line:
state    real   ptropnn        ij       dyn_em      1        -     i1  "PTROPNN"    "PTROP, nearest neighbor interp      "pa"
opening Registry/registry.io_boilerplate
including Registry/registry.io_boilerplate
opening Registry/io_boilerplate_temporary.inc
including Registry/io_boilerplate_temporary.inc
opening Registry/registry.fire
including Registry/registry.fire
opening Registry/registry.avgflx
including Registry/registry.avgflx
opening Registry/registry.stoch
including Registry/registry.stoch
opening Registry/registry.les
including Registry/registry.les
opening Registry/registry.cam
including Registry/registry.cam
opening Registry/registry.clm
including Registry/registry.clm
opening Registry/registry.ssib
including Registry/registry.ssib
opening Registry/registry.wrfplus
including Registry/registry.wrfplus
opening Registry/registry.lake
including Registry/registry.lake
opening Registry/registry.diags
including Registry/registry.diags
opening Registry/registry.afwa
including Registry/registry.afwa
opening Registry/registry.sbm
including Registry/registry.sbm
opening Registry/registry.bdy_perturb
including Registry/registry.bdy_perturb
make: 1254-059 The signal code from the last command is 11.
make: 1254-005 Ignored error code 11 from last command.
   rm -f module_state_description.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_state_description.F  > module_state_description.bb
1506-297 (S) Unable to open input file module_state_description.F. A file or directory in the path name does not exist..
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_state_description.bb | /lib/cpp -P  > module_state_description.f90
   rm -f module_state_description.b module_state_description.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_state_description.f90
    1517-020: (E) Source file is empty.
** module_state_description.f90   === End of Compilation 1 ===
1501-510  Compilation successful for file module_state_description.f90.
rm -f module_streams.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_streams.F  > module_streams.bb
"module_streams.F", line 7.10: 1506-296 (S) #include file "switches_and_alarms.inc" not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_streams.bb | /lib/cpp -P  > module_streams.f90
   rm -f module_streams.b module_streams.bb
   timex mpxlf90_r -o module_streams.o -c -O3 -qalias_size=209715200 -qstrict  -w -qspill=81920 -qmaxmem=-1 -qfree=f90      -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   -qrealsize=8 -qintsize=4 -qsuffix=f=f90 module_streams.f90
"module_streams.f90", line 8.45: 1516-050 (S) Expression or initial value must be evaluated at compile time.
"module_streams.f90", line 9.45: 1516-050 (S) Expression or initial value must be evaluated at compile time.
"module_streams.f90", line 10.45: 1516-050 (S) Expression or initial value must be evaluated at compile time.
"module_streams.f90", line 12.45: 1516-050 (S) Expression or initial value must be evaluated at compile time.
"module_streams.f90", line 13.45: 1516-050 (S) Expression or initial value must be evaluated at compile time.
"module_streams.f90", line 14.45: 1516-050 (S) Expression or initial value must be evaluated at compile time.
** module_streams   === End of Compilation 1 ===
1501-511  Compilation failed for file module_streams.f90.

real 0.11
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_domain_type.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_domain_type.F  > module_domain_type.bb
"module_domain_type.F", line 117.10: 1506-296 (S) #include file <state_subtypes.inc> not found.
"module_domain_type.F", line 125.10: 1506-296 (S) #include file <state_struct.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_domain_type.bb | /lib/cpp -P  > module_domain_type.f90
   rm -f module_domain_type.b module_domain_type.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_domain_type.f90
"module_domain_type.f90", line 6.8: 1514-219 (S) Unable to access module symbol file for module module_streams. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_domain_type.f90.

real 0.10
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_configure.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_configure.F  > module_configure.bb
"module_configure.F", line 8.10: 1506-296 (S) #include file <scalar_tables.inc> not found.
"module_configure.F", line 13.10: 1506-296 (S) #include file <scalar_tables_init.inc> not found.
"module_configure.F", line 31.10: 1506-296 (S) #include file <namelist_defines.inc> not found.
"module_configure.F", line 35.10: 1506-296 (S) #include file <namelist_defines2.inc> not found.
"module_configure.F", line 105.10: 1506-296 (S) #include file <namelist_defines.inc> not found.
"module_configure.F", line 108.10: 1506-296 (S) #include file <namelist_statements.inc> not found.
"module_configure.F", line 141.12: 1506-296 (S) #include file <namelist_defaults.inc> not found.
"module_configure.F", line 154.12: 1506-296 (S) #include file <config_reads.inc> not found.
"module_configure.F", line 176.10: 1506-296 (S) #include file <config_assigns.inc> not found.
"module_configure.F", line 314.10: 1506-296 (S) #include file <config_assigns.inc> not found.
"module_configure.F", line 328.12: 1506-296 (S) #include file <in_use_for_config_xz.inc> not found.
"module_configure.F", line 330.12: 1506-296 (S) #include file <in_use_for_config_tw.inc> not found.
"module_configure.F", line 332.12: 1506-296 (S) #include file <in_use_for_config_os.inc> not found.
"module_configure.F", line 334.12: 1506-296 (S) #include file <in_use_for_config_ln.inc> not found.
"module_configure.F", line 336.12: 1506-296 (S) #include file <in_use_for_config_gk.inc> not found.
"module_configure.F", line 338.12: 1506-296 (S) #include file <in_use_for_config_df.inc> not found.
"module_configure.F", line 340.12: 1506-296 (S) #include file <in_use_for_config_ac.inc> not found.
"module_configure.F", line 371.10: 1506-296 (S) #include file <namelist_defines.inc> not found.
"module_configure.F", line 372.10: 1506-296 (S) #include file <namelist_statements.inc> not found.
"module_configure.F", line 493.10: 1506-296 (S) #include file "namelist_nametest.inc" not found.
"module_configure.F", line 546.10: 1506-296 (S) #include file <scalar_indices.inc> not found.
"module_configure.F", line 547.10: 1506-296 (S) #include file <scalar_indices_init.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_configure.bb | /lib/cpp -P  > module_configure.f90
   rm -f module_configure.b module_configure.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_configure.f90
"module_configure.f90", line 6.7: 1514-219 (S) Unable to access module symbol file for module module_state_description. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_configure.f90.

real 0.11
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_alloc_space_0.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_alloc_space_0.F  > module_alloc_space_0.bb
"module_alloc_space.h", line 149.11: 1506-296 (S) #include file <allocs.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_alloc_space_0.bb | /lib/cpp -P  > module_alloc_space_0.f90
   rm -f module_alloc_space_0.b module_alloc_space_0.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_alloc_space_0.f90
"module_alloc_space_0.f90", line 22.11: 1514-219 (S) Unable to access module symbol file for module module_domain_type. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_alloc_space_0.f90.

real 0.10
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_alloc_space_1.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_alloc_space_1.F  > module_alloc_space_1.bb
"module_alloc_space.h", line 149.11: 1506-296 (S) #include file <allocs.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_alloc_space_1.bb | /lib/cpp -P  > module_alloc_space_1.f90
   rm -f module_alloc_space_1.b module_alloc_space_1.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_alloc_space_1.f90
"module_alloc_space_1.f90", line 22.11: 1514-219 (S) Unable to access module symbol file for module module_domain_type. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_alloc_space_1.f90.

real 0.11
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_alloc_space_2.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_alloc_space_2.F  > module_alloc_space_2.bb
"module_alloc_space.h", line 149.11: 1506-296 (S) #include file <allocs.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_alloc_space_2.bb | /lib/cpp -P  > module_alloc_space_2.f90
   rm -f module_alloc_space_2.b module_alloc_space_2.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_alloc_space_2.f90
"module_alloc_space_2.f90", line 22.11: 1514-219 (S) Unable to access module symbol file for module module_domain_type. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_alloc_space_2.f90.

real 0.10
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_alloc_space_3.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_alloc_space_3.F  > module_alloc_space_3.bb
"module_alloc_space.h", line 149.11: 1506-296 (S) #include file <allocs.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_alloc_space_3.bb | /lib/cpp -P  > module_alloc_space_3.f90
   rm -f module_alloc_space_3.b module_alloc_space_3.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_alloc_space_3.f90
"module_alloc_space_3.f90", line 22.11: 1514-219 (S) Unable to access module symbol file for module module_domain_type. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_alloc_space_3.f90.

real 0.11
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_alloc_space_4.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_alloc_space_4.F  > module_alloc_space_4.bb
"module_alloc_space.h", line 149.11: 1506-296 (S) #include file <allocs.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_alloc_space_4.bb | /lib/cpp -P  > module_alloc_space_4.f90
   rm -f module_alloc_space_4.b module_alloc_space_4.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_alloc_space_4.f90
"module_alloc_space_4.f90", line 22.11: 1514-219 (S) Unable to access module symbol file for module module_domain_type. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_alloc_space_4.f90.

real 0.10
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_alloc_space_5.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_alloc_space_5.F  > module_alloc_space_5.bb
"module_alloc_space.h", line 149.11: 1506-296 (S) #include file <allocs.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_alloc_space_5.bb | /lib/cpp -P  > module_alloc_space_5.f90
   rm -f module_alloc_space_5.b module_alloc_space_5.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_alloc_space_5.f90
"module_alloc_space_5.f90", line 22.11: 1514-219 (S) Unable to access module symbol file for module module_domain_type. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_alloc_space_5.f90.

real 0.11
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_alloc_space_6.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_alloc_space_6.F  > module_alloc_space_6.bb
"module_alloc_space.h", line 149.11: 1506-296 (S) #include file <allocs.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_alloc_space_6.bb | /lib/cpp -P  > module_alloc_space_6.f90
   rm -f module_alloc_space_6.b module_alloc_space_6.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_alloc_space_6.f90
"module_alloc_space_6.f90", line 22.11: 1514-219 (S) Unable to access module symbol file for module module_domain_type. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_alloc_space_6.f90.

real 0.11
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_alloc_space_7.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_alloc_space_7.F  > module_alloc_space_7.bb
"module_alloc_space.h", line 149.11: 1506-296 (S) #include file <allocs.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_alloc_space_7.bb | /lib/cpp -P  > module_alloc_space_7.f90
   rm -f module_alloc_space_7.b module_alloc_space_7.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_alloc_space_7.f90
"module_alloc_space_7.f90", line 22.11: 1514-219 (S) Unable to access module symbol file for module module_domain_type. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_alloc_space_7.f90.

real 0.11
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_alloc_space_8.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_alloc_space_8.F  > module_alloc_space_8.bb
"module_alloc_space.h", line 149.11: 1506-296 (S) #include file <allocs.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_alloc_space_8.bb | /lib/cpp -P  > module_alloc_space_8.f90
   rm -f module_alloc_space_8.b module_alloc_space_8.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_alloc_space_8.f90
"module_alloc_space_8.f90", line 22.11: 1514-219 (S) Unable to access module symbol file for module module_domain_type. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_alloc_space_8.f90.

real 0.10
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f module_alloc_space_9.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_alloc_space_9.F  > module_alloc_space_9.bb
"module_alloc_space.h", line 149.11: 1506-296 (S) #include file <allocs.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_alloc_space_9.bb | /lib/cpp -P  > module_alloc_space_9.f90
   rm -f module_alloc_space_9.b module_alloc_space_9.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_alloc_space_9.f90
"module_alloc_space_9.f90", line 22.11: 1514-219 (S) Unable to access module symbol file for module module_domain_type. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_alloc_space_9.f90.
   rm -f module_domain.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_domain.F  > module_domain.bb
"module_domain.F", line 1717.11: 1506-296 (S) #include file <deallocs.inc> not found.
make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_domain.bb | /lib/cpp -P  > module_domain.f90
   rm -f module_domain.b module_domain.bb
   timex mpxlf90_r -c -qrealsize=8 -qintsize=4 -qsuffix=f=f90 -qnoopt -w -qspill=81920 -qmaxmem=-1 -qfree=f90     -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   module_domain.f90
"module_domain.f90", line 30.8: 1514-219 (S) Unable to access module symbol file for module module_configure. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_domain.f90.

real 0.11
user 0.03
sys  0.03

make: 1254-004 The error code from the last command is 1.
make: 1254-005 Ignored error code 1 from last command.
   rm -f hires_timer.o
   mpcc_r -DMPI2_SUPPORT -DMPI2_SUPPORT -DFSEEKO64_OK  -o hires_timer.o -c -DNOUNDERSCORE -DDM_PARALLEL   -DMAX_HISTORY=25 -DNMM_CORE=0 hires_timer.c
   rm -f module_timing.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_timing.F  > module_timing.bb
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_timing.bb | /lib/cpp -P  > module_timing.f90
   rm -f module_timing.b module_timing.bb
   timex mpxlf90_r -o module_timing.o -c -O3 -qalias_size=209715200 -qstrict  -w -qspill=81920 -qmaxmem=-1 -qfree=f90      -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   -qrealsize=8 -qintsize=4 -qsuffix=f=f90 module_timing.f90
** module_timing   === End of Compilation 1 ===
1501-510  Compilation successful for file module_timing.f90.

real 0.32
user 0.11
sys  0.04

   rm -f module_nesting.o
   /lib/cpp -P -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc -DEM_CORE=1  -DNMM_CORE=0 -DNMM_MAX_DIM=2600  -DCOAMPS_CORE=0  -DDA_CORE=0  -DWRFPLUS=1  -DEXP_CORE=0 -DIWORDSIZE=4 -DDWORDSIZE=8 -DRWORDSIZE=8 -DLWORDSIZE=4  -DNONSTANDARD_SYSTEM_SUBR -DNATIVE_MASSV -DWRF_USE_CLM    -DDM_PARALLEL   -DNETCDF           -DUSE_ALLOCATABLES  -DGRIB1  -DINTIO  -DLIMIT_ARGS  -DCONFIG_BUF_LEN=65536  -DMAX_DOMAINS_F=21  -DMAX_HISTORY=25  -DNMM_NEST=0  -I.    module_nesting.F  > module_nesting.bb
   /xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/tools/standard.exe module_nesting.bb | /lib/cpp -P  > module_nesting.f90
   rm -f module_nesting.b module_nesting.bb
   timex mpxlf90_r -o module_nesting.o -c -O3 -qalias_size=209715200 -qstrict  -w -qspill=81920 -qmaxmem=-1 -qfree=f90      -I../dyn_em          -I../dyn_nmm                          -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/esmf_time_f90   -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/main  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_netcdf  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/external/io_int  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/frame  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/share  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/phys  -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/chem -I/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3/inc  -I/xxxxx/xxxxx/HWRF_lib/include   -qrealsize=8 -qintsize=4 -qsuffix=f=f90 module_nesting.f90
"module_nesting.f90", line 9.8: 1514-219 (S) Unable to access module symbol file for module module_domain. Check path and file permissions of file. Use association not done for this module.
1501-511  Compilation failed for file module_nesting.f90.

...
 
==========================================================================
build started:   Thu Oct 15 14:56:45 IST 2015
build completed: Thu Oct 15 15:13:42 IST 2015
 
---> Problems building executables, look for errors in the build log  <---
 
==========================================================================
 



sayok88
 
Posts: 1
Joined: Thu Oct 15, 2015 7:21 am

Re: WRFPLUS 3.7.1 compilation error.

Postby DwyaneChou » Sat Nov 21, 2015 11:49 am

Your path looks strange "/xxxxx/xxxxx/xxxxxBuild_WRF/WRFPLUSV3", maybe you should put WRFPLUS into another position. And have you compiled WRFDA-4DVAR successful ? I met an internal compiler error during compiling WRFDA-4DVAR by xlf , if you've compiled it successful, could you please let me know how you did it?
DwyaneChou
 
Posts: 6
Joined: Mon Dec 29, 2014 10:36 am

Re: WRFPLUS 3.7.1 compilation error.

Postby kwthomas » Tue Nov 24, 2015 2:42 pm

There is a typo in one of the Registry files. Your log shows you tripped the problem.

Edit "Registry/EM_COMMON". You want line 166, the one that has PTROPNN on it. Add the missing quote after the word "interp".
Kevin W. Thomas
Center for Analysis and Prediction of Storms
University of Oklahoma
kwthomas
 
Posts: 188
Joined: Thu Aug 07, 2008 6:53 pm

Re: WRFPLUS 3.7.1 compilation error.

Postby jjasonlam » Wed Jul 19, 2017 12:17 pm

Thanks. This solves my problem as well.
jjasonlam
 
Posts: 9
Joined: Mon Oct 31, 2016 9:45 am


Return to Installation

Who is online

Users browsing this forum: No registered users and 1 guest