No wrfinput_d02 or d03 etc files

Discuss the nesting capability within the model itself and any problems you might have run into.

No wrfinput_d02 or d03 etc files

Postby MaxPowers » Fri Jun 17, 2011 8:53 am

Hello,
I have been trying to use WRF for a 4 domain run, or 3 additional nested grids. When I run my WPS part I am able to create met_em...d01, d02, d03, and d04 files.
(met_em.d01.2008-07-09_12:00:00.nc met_em.d01.2008-07-09_18:00:00.nc met_em.d01.2008-07-10_00:00:00.nc met_em.d01.2008-07-10_06:00:00.nc met_em.d02.2008-07-09_12:00:00.nc met_em.d02.2008-07-09_18:00:00.nc met_em.d02.2008-07-10_00:00:00.nc met_em.d02.2008-07-10_06:00:00.nc met_em.d03.2008-07-09_12:00:00.nc met_em.d03.2008-07-09_18:00:00.nc met_em.d03.2008-07-10_00:00:00.nc met_em.d03.2008-07-10_06:00:00.nc met_em.d04.2008-07-09_12:00:00.nc met_em.d04.2008-07-09_18:00:00.nc met_em.d04.2008-07-10_00:00:00.nc met_em.d04.2008-07-10_06:00:00.nc)

However when I run real.exe I only obtain wrfinput_d01 and wrfbdy_d01 files. I know that there should not be any more wrfbdy files, but I have no idea why I am not getting the other wrfinput files!

Any help would be appreciated.

Here is my namelist.input followed by my namelist.wps

NAMELIST.INPUT

&time_control
run_days = 0,
run_hours = 18,
run_minutes = 00,
run_seconds = 0,
start_year = 2008, 2008, 2008, 2008,
start_month = 07, 07, 07, 07,
start_day = 09, 09, 09, 09,
start_hour = 12, 12, 12, 12,
start_minute = 00, 00, 00, 00,
start_second = 00, 00, 00, 00,
end_year = 2008, 2008, 2008, 2008,
end_month = 07, 07, 07, 07,
end_day = 10, 10, 10, 10,
end_hour = 06, 06, 06, 06,
end_minute = 00, 00, 00, 00,
end_second = 00, 00, 00, 00,
interval_seconds = 21600,
input_from_file = .true.,.true.,.true.,.true.,
history_interval = 60, 60, 60, 60,
frames_per_outfile = 1, 1, 1, 1,
restart = .false.,
restart_interval = 1080,
io_form_history = 2
io_form_restart = 2
io_form_input = 2
io_form_boundary = 2
debug_level = 0
auxinput4_inname = "wrflowinp_d<domain>"
auxinput4_interval = 180,
io_form_auxinput4 = 2
write_hist_at_0h_rst = .false.
/

&domains
time_step = 120
time_step_fract_num = 0,
time_step_fract_den = 1,
max_dom = 4,
e_we = 100, 172, 346, 616,
e_sn = 100, 160, 325, 598,
s_we = 1, 1, 1, 1,
s_sn = 1, 1, 1, 1,
e_vert = 28, 28, 28, 28,
p_top_requested = 5000,
num_metgrid_levels = 27,
num_metgrid_soil_levels = 4,
dx = 27000, 9000, 3000, 1000,
dy = 27000, 9000, 3000, 1000,
grid_id = 1, 2, 3, 4,
parent_id = 1, 1, 2, 3,
i_parent_start = 1, 17, 31, 31,
j_parent_start = 1, 17, 31, 31,
parent_grid_ratio = 1, 3, 3, 3,
parent_time_step_ratio = 1, 3, 3, 3,
feedback = 1,
smooth_option = 0
/

&physics
sst_update = 0
gsfcgce_hail = 1,
mp_physics = 9, 9, 9, 9,
ra_lw_physics = 1, 1, 1, 1,
ra_sw_physics = 1, 1, 1, 1,
radt = 30, 30, 30, 30,
sf_sfclay_physics = 1, 1, 1, 1,
sf_surface_physics = 2, 2, 2, 2,
bl_pbl_physics = 1, 1, 1, 1,
bldt = 0, 0, 0, 0,
cu_physics = 1, 1, 1, 1,
cudt = 5, 5, 5, 5,
isfflx = 1,
ifsnow = 0,
icloud = 1,
surface_input_source = 1,
num_soil_layers = 4,
num_land_cat = 1,
sf_urban_physics = 0, 0, 0, 0,
/

&fdda
grid_fdda = 0, 0, 0, 0,
gfdda_inname = "wrffdda_d<domain>",
gfdda_end_h = 00, 00, 00, 00,
gfdda_interval_m = 180, 180, 180, 180,
fgdt = 0, 0, 0, 0,
if_no_pbl_nudging_uv = 0, 0, 0, 0,
if_no_pbl_nudging_t = 1, 1, 1, 1,
if_no_pbl_nudging_q = 1, 1, 1, 1,
if_zfac_uv = 0, 0, 0, 0,
k_zfac_uv = 10, 10, 10, 10,
if_zfac_t = 0, 0, 0, 0,
k_zfac_t = 10, 10, 10, 10,
if_zfac_q = 0, 0, 0, 0,
k_zfac_q = 10, 10, 10, 10,
guv = 0.0003, 0.0003, 0.0003, 0.0003,
gt = 0.0003, 0.0003, 0.0003, 0.0003,
gq = 0.0003, 0.0003, 0.0003, 0.0003,
if_ramping = 1,
dtramp_min = 60.0,
io_form_gfdda = 2,
/

&dynamics
w_damping = 0,
diff_opt = 1,
km_opt = 4,
diff_6th_opt = 0, 0, 0, 0,
diff_6th_factor = 0.12, 0.12, 0.12, 0.12,
base_temp = 290.
damp_opt = 0,
zdamp = 5000., 5000., 5000., 5000.,
dampcoef = 0.2, 0.2, 0.2, 0.2,
khdif = 0, 0, 0, 0,
kvdif = 0, 0, 0, 0,
non_hydrostatic = .true., .true., .true.,.true.,
moist_adv_opt = 1, 1, 1, 1,
scalar_adv_opt = 1, 1, 1, 1,
/

&bdy_control
spec_bdy_width = 5,
spec_zone = 1,
relax_zone = 4,
specified = .true., .false., .false., .false.,
nested = .false., .true., .true., .true.,
/

&grib2
/

&namelist_quilt
nio_tasks_per_group = 0,
nio_groups = 1,
/

NAMELIST.WPS

&share
wrf_core = 'ARW',
max_dom = 4,
start_date = '2008-07-09_12:00:00','2008-07-09_12:00:00','2008-07-09_12:00:00','2008-07-09_12:00:00',
end_date = '2008-07-10_06:00:00','2008-07-10_06:00:00','2008-07-10_06:00:00','2008-07-10_06:00:00',
interval_seconds = 21600,
io_form_geogrid = 2,
/

&geogrid
parent_id = 1, 1, 2, 3,
parent_grid_ratio = 1, 3, 3, 3,
i_parent_start = 1, 17, 31, 31,
j_parent_start = 1, 17, 31, 31,
e_we = 100, 172, 346, 616,
e_sn = 100, 160, 325, 598,
geog_data_res = '10m','10m','10m','10m',
dx = 27000,
dy = 27000,
map_proj = 'mercator',
ref_lat = 48.937,
ref_lon = -115.118,
truelat1 = 48.937,
truelat2 = 48.937,
stand_lon = -115.118,
geog_data_path = '/home/software/WRF/geog'
/


&ungrib
out_format = 'WPS',
prefix = 'JUSTIN',
/

&metgrid
fg_name = 'JUSTIN'
io_form_metgrid = 2,
MaxPowers
 
Posts: 32
Joined: Sat May 14, 2011 5:05 pm

Re: No wrfinput_d02 or d03 etc files

Postby adaypr » Tue Nov 29, 2011 4:59 am

Try put debug_level to a high level (maybe 100) in order to see if there are any crash in the real.exe process

Best regards,
Aday Perera
adaypr
 
Posts: 14
Joined: Thu Dec 23, 2010 6:56 am

Re: No wrfinput_d02 or d03 etc files

Postby VictoriaS » Tue Nov 29, 2011 11:11 am

Should
parent_id = 1, 1, 2, 3,

not be
parent_id = 0, 1, 2, 3,

Victoria
VictoriaS
 
Posts: 15
Joined: Thu Jun 17, 2010 11:29 am


Return to Nesting

Who is online

Users browsing this forum: No registered users and 3 guests